Programming Menu
9
Table 9.2 Programming menu at a glance. (continued)
Calendar Clock
Use the arrows to select 12 or 24 clock mode.
Use the LOG button to step through the year,
month, day, hours, minutes and AM/PM fields
and use the arrow buttons to change a setting.
Press MODE to step to the next parameter.
Press MODE 6 times
from first screen.
Auto Interval Use the arrows to set the Auto-Interval (auto-
matic data logger) ON or OFF.
Use the LOG button to move from field to field.
Use the arrows to change a value. Refer to
Section 9.9 for complete information.
Press MODE to step to the next parameter.
Press MODE 7 times
from first screen.
Auto Power
OFF (APO)
Use the arrows to set the auto power off timer
to 5 or 15 seconds.
Press MODE to step to the next parameter.
Press MODE 8 times
from first screen.
Calibration
date
View the date of the last calibration.
Press MODE to exit the menu.
Press MODE 9 times
from first screen.
#NAS100131; r. AC/92852/92852; en-US
25
To Next Page
Loading...
