FLIR ThermaCAM P65

CommentsValueLabel
To change how the measurement results will be
displayed, select Max, Min, or Avg.
■
Min
■
Max
■
Avg
Result
To display two moving cursors inside the box,
continuously indicating the maximum and mini-
mum temperature, select On.
■
On
■
Off
Show Max/Min
10.2.3.4 Add circle
Point to Add circle and press the joystick to add a circle. A circle will now appear on
the screen. Press and hold down the joystick for one second when the circle is selected
to display a shortcut menu.
10390503;a3
Figure 10.26 Shortcut menu for Circle
Figure 10.27 Explanations of the shortcut menu for Circle
ExplanationCommand
Point to Delete and press the joystick to delete the circle.Delete
Point to Exit edit mode and press the joystick to exit the edit mode.Exit edit mode
Point to Set as ref temp and press the joystick to use the circle
temperature as the reference temperature.
Set as ref temp
Point to Max and press the joystick to display the maximum temper-
ature of the circle.
Max
Point to Min and press the joystick to display the minimum temper-
ature of the circle.
Min
Point to Avg and press the joystick to display the average tempera-
ture of the circle
Avg
See below.Settings
Point to Settings and press the joystick to display a Circle settings dialog box where
you can change the settings for the circle.
10
102 Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
10 – Camera program