FLIR ThermaCAM P65

10.2.5.3 Save
10568003;a2
Figure 10.49 Save Setup dialog box
Figure 10.50 Explanations of the Save Setup dialog box
CommentsValueLabel
If Yes is selected, the text comment dialog box will
appear when you save an image. This function
gives you a chance to add a text comment to the
image
■
No
■
Yes
Prompt text comment
If Yes is selected, the voice comment dialog box
will appear when you save an image. This function
gives you a chance to add a voice comment to the
image
■
No
■
Yes
Prompt voice comment
If Yes is selected, the camera will change to visual
mode when you save an image. This function gives
you a chance to add a visual image to the infrared
image.
■
Yes
■
No
Prompt visual
For a detailed explanation, see below.
■
Unique counter
■
Date
■
Directory
Image naming
■
If On is selected, all on-screen graphics will be
saved together with the image
■
If Off is selected, only the image (together with
any temperature information) will be saved
➲ The difference between images saved with or
without on-screen graphics will only be evident
when looking at the images using a third-party
image viewer.
■
On
■
Off
Overlay
Figure 10.51 Naming based on unique counter – explanations
Typical syntax: IR_nnnn.jpg
■
IR = infrared image
■
DC = visual image
■
SEQ = sequence image
■
AVI = Audio Video Interleave
IR or DC or SEQ or AVI
Unique counternnnn
10
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006 117
10 – Camera program