ValueLabel
■
NTSC
■
PAL
Video output
■
°C
■
°F
Temp unit
■
Feet
■
Meters
Distance unit
■
YYYY-MM-DD
■
YY-MM-DD
■
MM/DD/YY
■
DD/MM/YY
Date format
■
24 hour
■
AM/PM
Time format
10.2.5.12 Camera info
The Camera info dialog box shows information about memory usage, battery status,
serial numbers, software revision etc. No changes can be made.
10.2.5.13 Profile
Point to Profile and click Save to save the following user settings as a user profile:
■ Measurement markers
■ Object parameters
■ Palette
■ Image settings
■ Power settings
■ Date & time
Once you have saved a profile you can load it again by pointing to Load.
10.2.5.14 Factory default
Point to Factory default and press the joystick to reset the camera to the factory set-
tings.
➲ The camera will be restarted when you restore factory settings. This will take a few
seconds.
10
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006 125
10 – Camera program
To Next Page
Loading...
