FLIR ThermaCAM P65

10.2.5.2 Difference
10393203;a3
Figure 10.47 Difference settings dialog box
Difference is a command that calculates the temperature difference between two
measurement markers, or the reference temperature and a measurement marker.
Figure 10.48 Explanations of the Difference settings dialog box
CommentsValueLabel
Move the joystick left/right to select the first func-
tion in the difference calculation.
Configuration-depen-
dent
Function
Select a number between 1 and 10 to assign an
identity to this function.
1–10Identity
Move the joystick left/right to define the type of
result the difference calculation will use for its cal-
culations.
Depending on the
Function settings
Result
Move the joystick left/right to select the second
function in the difference calculation.
Configuration-depen-
dent
Function
Select a number between 1 and 10 to assign an
identity to this function.
1–10Identity
Move the joystick left/right to define the type of
result the difference calculation will use for its cal-
culations.
Depending on the
Function settings
Result
10
116 Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
10 – Camera program