■ Luminous intensity: 35 000 mcd in the middle of the light beam; 20 000 mcd
measured at an angle of ±10° from the light beam, and 5 000 mcd measured at
an angle of ±20° from the light beam.
LEMO 1B, 6 pins. The video lamp uses the same connector as
the RS-232/USB signal (see figure 16.1 on page 144).
Connector type:
Pin numberTypeSignal name
3OUTPOWER
4GNDGND
16.11.2 Remote control connector
10402803;a1
Figure 16.3 Pin configuration for remote control connector (on camera – operator’s side)
LEMO 1B, 8 pinsConnector type:
Pin numberTypeSignal name
1POWERP8VA
2I/OSCL_D
3GNDGNDD
4OUTLVDS_DISP-
5OUTLVDS_DISP+
6GNDGNDD
7I/OSDA_D
8POWERP8VA
16
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006 145
16 – Technical specifications & dimensional drawings
To Next Page
Loading...
