10397303;a3
Figure 8.7 Attaching the remote control
ActionStep
Firmly hold the camera in your left hand and hold the remote control in your right
hand.
1
Align the remote control handle with the camera handle so that the rear end of the
remote control handle mates with the rear spring-loaded latch.
2
Pull the remote control handle backwards and then push it down – towards the
camera handle – to lock it between the two latches.
3
8
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006 63
8 – Tutorials
To Next Page
Loading...
