FLIR ThermaCAM P65

Description of partCallout
Laser LocatIR with lens cap
➲ Please note the following:
■
A laser icon appears on the screen when the Laser LocatIR is switched on.
■
Since the distance between the laser beam and the image center will vary by
the target distance, Laser LocatIR should only be used as an aiming aid. Always
check the LCD to make sure the camera captures the desired target.
■
Do not look directly into the laser beam.
■
When not in use, the Laser LocatIR should always be protected by the lens
cap.
For more information about Laser LocatIR, see section 9.6 – Laser LocatIR on
page 80.
2
Button for Laser LocatIR
For more information about Laser LocatIR, see section 9.6 – Laser LocatIR on
page 80.
3
Visual camera
For more information about the visual camera, see section 9.7 – Visual camera on
page 81.
4
9
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006 73
9 – Camera overview