FLOWBIRD STRADA PAL - Page 148

STRADA PAL – MAINTENANCE MANUAL
148/149
Message
Log
P1000
status
Description
Action
01XX
No specific message displayed
Pinpad paired and commissioned
Nothing to do
ALERT !
0x04XX
04XX
Pinpad error #04
Antiremoval sensor(s) violated
Pinpad out of order.
 check mounting.
 do the commissioning
 If the led is still blinking
red after reboot of the reader,
return product to factory for
analysis with a “reader
antiremoval SWx issue”
notice.
ALERT !
0x02XX
02XX
Pinpad error #02
Tampering sensor(s) violated
Pinpad deactivated.
Return product to factory for
analysis with a “internal
sensor violated” notice
(please write which one is
violated)
ALERT !
0x10XX
10XX
Pinpad error #10
Reader and pinpad are not paired.
Process pairing
ALERT !
0x20XX
20XX
Pinpad error #20
Anti-removal and / or tampering
sensors not initialized. Pinpad is
not active.
Return product to factory for
analysis
with a “pinpad not initialized”
notice