Fluidigm Hyperion - Hyperion Imaging System Specifications

Chapter 1: Hyperion Imaging System Introduction and Specifications
Hyperion Imaging System Specifications
10 Hyperion Imaging System: User Guide
Hyperion Imaging System Specifications
Table 2. System specifications for the Hyperion Imaging System
Description System Specification
Tissue thickness (full ablation) ≤ µm thickness
Addressable sample size ≥ mm x  mm
Scan area ≥ mmP

P /  Hr (@Hz)
Ablation spot size ≤%
Recommended operating temperature – °C
Optimal operating temperature  ±  °C
Table 3. Electrical specifications for the Hyperion Imaging System
Description Electrical Specifications
Power  VA
Operating voltage – V AC
Operating frequency / Hz
Operating mode Single-phase operation
Power dissipation, full load < W
Table 4: Gas Specifications for the Hyperion Imaging System.
Gas
Specifications
Purity Pressure (psi) Flow Rate
(L/min)
Impurities (ppm)
Argon ≥.%  ±   Oxygen <
Nitrogen <
Hydrogen <
Water <
Helium ≥.%
Grade .
 ±  NA Oxygen <.
Nitrogen <.
Hydrogen <.
Water <.