Chapter 1: Hyperion Imaging System Introduction and Specifications
Solid-State Laser Specifications
Hyperion Imaging System User Guide
9
Figure 4. Graph of P
175
PLu intensity. The plume width of a single plume is represented as 384 pushes during 20 Hz
operation. A 20 Hz frequency is used to record and optimize transients during tuning.
Solid-State Laser Specifications
Table 1. Performance specifications for the solid-state laser
Description Performance Specifications
Laser type Nd:YAG
Wavelength nm
Energy output ≤ µJ
Repetition rate (frequency) // Hz
To Next Page
Loading...
