46
Hyperion Imaging System User Guide
Chapter 4: Maintenance
The Hyperion™ Imaging System is very simple to maintain. You may be required to clean the
outside of the instrument, but all internal components including the laser ablation chamber
and the cover glass are addressed during preventive maintenance every 6 months.
31TCleaning Instructions
Table 19. Cleaning frequency and reagents required for maintenance and cleaning of the Hyperion Imaging System
Parts Frequency Performed by Agents/Equipment Company and
Part Number
Injector As required Operator % Contrad® in
DIW
Glassware brushes
Decon Labs
Torch As required Operator % Contrad in
DIW
Glassware brushes
Decon Labs
Skimmer-
Reducer
Preventive
Maintenance
Field service
engineer
Sampler Cone Preventive
Maintenance
Field service
engineer
Coupling Tube Preventive
Maintenance
Field service
engineer
NOTE For cleaning frequency in solution mode refer to the Helios User Guide (PN 400250),
Chapter 6: Maintenance. It is recommended that you clean glassware and instrument cones
weekly if you are running the Helios™ instrument in solution mode.
To Next Page
Loading...
