Chapter 3: Operation
Disconnect the Hyperion Tissue Imager from Helios
Hyperion Imaging System User Guide
45
IMPORTANT It takes up to 12 hours for your instrument to stabilize after switching to
solution mode.
Helios is now ready to run in cell suspension mode for mass cytometry analysis. Refer to the
software Help for information about tuning, acquisition, and instrument control in cell
suspension mode. Help is started from the side bar, under
57TSystem57T, click 57THelp57T.
IMPORTANT Run a Full Tuning Protocol before running the instrument in solution mode. In
Tuning Manager select Full Protocol from the drop-down.
To Next Page
Loading...
