Page 2
FW-E115-P-M_v0203_03_EN.docx
SAFETY INSTRUCTIONS
• Any responsibility is lapsed if the instructions and procedures as described in this manual
are not followed.
• LIFE SUPPORT APPLICATIONS: The E115-P is not designed for use in life support
appliances, devices, or systems where malfunction of the product can reasonably be
expected to result in a personal injury. Customers using or selling these products for use
in such applications do so at their own risk and agree to fully indemnify the manufacturer
and supplier for any damages resulting from such improper use or sale.
• Electro static discharge does inflict irreparable damage to electronics! Before installing or
opening the E115-P, the installer has to discharge himself by touching a well-grounded
object.
• The E115-P must be installed in accordance with the EMC guidelines (Electro Magnetic
Compatibility).
• Do connect a proper grounding to the housing as indicated if the E115-P is used on a
ship, truck or other application with no ground. The earth lead between the housing and
the removable terminal-block may never be removed.
DISPOSAL OF ELECTRONIC WASTE
• At the end of its life this product should be disposed of according to the (inter)national
regulations regarding waste electronic equipment. If a battery is installed in this product it
should be disposed of separately. The separate collection and recycling of your waste
equipment will help to conserve natural resources and ensure that it is recycled in a
manner that protects the environment.
SAFETY RULES AND PRECAUTIONARY MEASURES
• The manufacturer accepts no responsibility whatsoever if the following safety rules and
precautions instructions and the procedures as described in this manual are not followed.
• Modifications of the E115-P implemented without preceding written consent from the
manufacturer, will result in the immediate termination of product liability and warranty
period.
• Installation, use, maintenance and servicing of this equipment must be carried out by
authorized technicians.
• Check the mains voltage and information on the manufacturer's plate before installing the
E115-P.
• Check all connections, settings and technical specifications of the various peripheral
devices with the E115-P supplied.
• Never open the enclosure in hazardous areas while connected to power supplying or
consuming devices other than the internal battery supply.
• Open the E115-P only if all leads are free of potential.
• Never touch the electronic components (ESD sensitivity).
• Never expose the system to heavier conditions than allowed according to the enclosure
classification (see manufacture's plate and chapter 4.2.).
• If the operator detects errors or danger, or disagrees with the safety precautions taken,
then inform the owner or principal responsible.
• The local labor and safety laws and regulations must be adhered to.
To Next Page
Loading...
Need help?
General
