Fluke 105B - Page 159

9 - 10 92B/96B/99B/105B Users Manual
Environmental (continued)
Electromagnetic Interference ..................................................................................................meets the following specifications
(see also "DECLARATION OF CONFORMITY" on page XI)
The Fluke 92B, 96B, 99B, and 105B, including standard accessories, conforms with the EEC Directive 89/336 for EMI
immunity, as defined by IEC 801-3, with the addition of the following tables.
Scope mode (excluding probe factor):
Table 1
Table 2
Susceptibility: no visible disturbance
Frequency range:
10 kHz to 25 MHz
E = < 0.1V/m E = 1 V/m E = 3 V/m
Stand alone 1 mV/div to 100 V/div 1 mV/div to 100 V/div 1 mV/div to 100 V/div
With PM8918 1 mV/div to 100 V/div 1 mV/div to 100 V/div 5 mV/div to 100 V/div
Susceptibility: no visible disturbance
Frequency range:
25 MHz to 1 GHz
E = < 0.1V/m E = 1 V/m E = 3 V/m
Stand alone 1 mV/div to 100 V/div 2 mV/div to 100 V/div 5 mV/div to 100 V/div
With PM8918 1 mV/div to 100 V/div 500 mV/div to 100 V/div 1V/div to 100 V/div