Fluke 1550C User Manual

Insulation Tester
Symbols
5
Symbols
Symbols on the Tester and in the manual are explained Table 1.
Table 1. Symbols
Symbol Meaning
P
Conforms to European Union standards.
® Examined and licensed by TÜV Product Services.
)
Canadian Standards Association is the certified body used for
testing compliance to safety standards.
W
Risk of Danger. Important information. See Manual.
X
Hazardous voltage
T
Equipment protected by double or reinforced insulation.

Do not use in distribution systems with voltages higher than
1100 V.

Interference is present. Displayed value might be outside of
specified accuracy.

Ramp mode indicator

Electrical breakdown
B
Volts AC
J
Earth Ground
~
Do not dispose of this product as unsorted municipal waste. Go
to Fluke’s website for recycling information.

Fluke 1550C Specifications

General

Display type	-
Housing color	Grey, Yellow
Maximum voltage	5000 V
AC voltage range	250 - 5000 V
Operating altitude	0 - 2000 m
Overload protection	Yes
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
International Protection (IP) code	IP40
Battery technology	Sealed Lead Acid (VRLA)
Number of batteries supported	1

Weight and Dimensions

Depth	277 mm
Width	269 mm
Height	160 mm
Weight	3700 g