Fluke 1550C User Manual

1550C/1555
Users Manual
26
Download Results to PC
Note
Before the USB-IR cable can be used, software drivers must be
installed on your Windows PC. See the USB-IR Installation Guide for
more information.
To connect the Tester to the PC for use with FlukeView Forms Basic
Documenting Software:
The Tester should not be running a test; otherwise, serial communications will
be disabled.
1. Connect the USB-IR cable to an available USB port on the PC.
2. Attach the IR device to the IR port on the Tester.
3. Open FlukeView Forms Basic Documenting Software.
4. The current COM serial port setting is displayed at the bottom right of the
FlukeView Forms Basic window. Double-click on it to change the COM
port setting to the virtual COM port used by the USB-IR cable.
5. Turn the Tester on.
6. Follow the instructions for transferring data from the Tester to the PC
found in the online FlukeView Forms Users Manual.
Note
Verify that the download was successful before deleting the stored
test results on the Tester.
Note
Results data stored in the Tester can be deleted from the PC using the
FlukeView Forms Basic application. See the FlukeView Forms Users
Manual file for details.
Delete Test Results
To delete all saved test results:
1. Push  to call the Function menu.
2. Push  or  to select the menu item DELETE RESULT.
3. Push  to call the menu item.
4. Push . REALLY DEL? Appears.
5. Push  to confirm the deletion or push  to return to Test Voltage.

Fluke 1550C Specifications

General

Display type	-
Housing color	Grey, Yellow
Maximum voltage	5000 V
AC voltage range	250 - 5000 V
Operating altitude	0 - 2000 m
Overload protection	Yes
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
International Protection (IP) code	IP40
Battery technology	Sealed Lead Acid (VRLA)
Number of batteries supported	1

Weight and Dimensions

Depth	277 mm
Width	269 mm
Height	160 mm
Weight	3700 g