Fluke 1550C User Manual

Insulation Tester
Maintenance
27
Notes
Individual test locations cannot be deleted; however, they can be
overwritten.
The Delete function deletes all stored test results.
Maintenance
XW Warning
To avoid possible electric shock or personal injury:
• Do not attempt to repair or service your Tester
beyond what is described in this manual.
• Only qualified service personnel should service
the Tester.
• There are no user-replaceable parts inside the
Tester.
Cleaning
XW Warning
To avoid possible electric shock or personal injury,
remove excess water from the cloth before cleaning
the Tester to ensure that water does not enter any
terminal.
Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents to clean the Tester.

Fluke 1550C Specifications

General

Display type	-
Housing color	Grey, Yellow
Maximum voltage	5000 V
AC voltage range	250 - 5000 V
Operating altitude	0 - 2000 m
Overload protection	Yes
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
International Protection (IP) code	IP40
Battery technology	Sealed Lead Acid (VRLA)
Number of batteries supported	1

Weight and Dimensions

Depth	277 mm
Width	269 mm
Height	160 mm
Weight	3700 g