Specifications
Meter Measurements for Fluke 190-xx4
8
117
Phase (A and B, C and D)
Range ............................................ -180 to +180 degrees
Resolution.......................................................... 1 degree
Accuracy
0.1 Hz to 1 MHz ...........................................±2 degrees
1 MHz to 10 MHz .........................................±3 degrees
Temperature (TEMP)
With Optional Temperature Probe (
°
F not for Japan)
Ranges (°C or °F) ..................................-40.0 to +100.0 °
-100 to +250 °
-100 to +500 °
-100 to +1000 °
-100 to + 2500 °
Probe Sensitivity ............................ 1 mV/°C and 1 mV/°F
Accuracy ........................................... ±(1.5 % + 5 counts)
(add temperature probe accuracy for overall accuracy)
Decibel (dB)
dBV ................................................ dB relative to one volt
dBm ................... dB relative to one mW in 50 Ω or 600 Ω
dB on ..........................................VDC, VAC, or VAC+DC
Accuracy .......................... same as VDC, VAC, VAC+DC
Meter Measurements for Fluke 190-xx4
Four of the Automatic Scope Measurements as defined
above may be displayed at the same time, using larger
screen area for convenient reading, suppressing the scope
waveform information. For specifications see Automatic
scope Measurements above.
To Next Page
Loading...
Need help?
General
