Fluke 190 Series II - Freezing the Screen

Fluke 190 Series II
Users Manual
20
5
ENTER
Open the PEAK menu.
6
ENTER
Select the Peak-Peak
measurement.
Figure 8 shows an example of the screen with two
readings. The character size will be reduced when more
then two readings are on.
Figure 8. Hz and V peak-peak as Scope Readings
Freezing the Screen
You can freeze the screen (all readings and waveforms) at
any time.
1
HOLD
RUN
Freeze the screen. HOLD appears
at the right of the reading area.
The key illumination is on.
2
HOLD
RUN
Resume your measurement. The
key illumination is off.