Fluke 5790B - Absolute Uncertainty; Accuracy; Artifact Calibration; Artifact Standard

Remote Commands
Alphabetical List of 5790B Device-Dependent Commands 6
6-45
EOL
Sequential command. Sets the end of line terminator for outgoing data for a
specified remote port.
Parameter
1. SERIAL, USB, ENET
2. CRLF, CR, LF
Example
EOL ENET, CR
Sets the end of line terminator for Ethernet communication to CR.
EOL?
Sequential command. Returns the end of line terminator for outgoing data for a
specified remote port.
Parameter
1. SERIAL, USB, ENET
Response
(CRD}
Example
EOL? SERIAL
Returns CRLF if the serial end of line terminator is set to CRLF.
EOFSTR
Sets the End-Of-File character string. The maximum length is two characters.
The EOF setting is saved when the power is turned off. (Nonvolatile overlapped
command.)
Parameters
The EOF string (two characters maximum)
EOFSTR?
Returns the End-Of-File character string
Parameter
None
Response
(String) The End-Of-File character string