Fluke 5790B - Instruction Manuals; 5790 B Operators Manual; 5790 B Service Manual; Service Information

5790B
Operators Manual
1-6
• Real-time clock for date and time stamping reports, recording the time and
date of calibration, and calculating specifications.
• Standard IEEE-488 (GPIB) interface, complying with ANSI/IEEE Standards
488.1-1987 and 488.2-1987.
• EIA Standard RS-232-C serial data interface for remote control of the
Product.
• Universal Serial Bus (USB) 2.0 high-speed interface device port for remote
control of the 5790B.
• Integrated 10/100/1000BASE-T Ethernet port for network connection remote
control of the 5790B.
• Extensive internal software-controlled self testing and diagnostics of analog
and digital functions.
• USB Host port to save calibration reports to a flash drive.
• Visual Connection Management input terminals illuminate to help show
correct cable connection configurations.
• Soft Power - automatic selection of line voltage/frequency.
• Display with touch panel overlay.
Instruction Manuals
This Operators Manual contains operating instructions for the Product. The
Product Manual set provides complete information for the operators and service
or maintenance personnel. The set includes the following manuals:
• 5790B Operators Manual, on the Product CD
• 5790B Service Manual available on the Fluke Calibration website.
5790B Operators Manual
This 5790B Operators Manual provides complete information for installing the
Product and operating the Product from the front panel and from the remote
interface. The manual also provides a glossary of terms related to ac-dc transfers
as well as other information for the Operators and programmer, such as
specifications, and operating parameter setup procedures.
5790B Service Manual
The 5790B Service Manual explains service, maintenance, verification, and
calibration procedures in full detail.
Service Information
Factory authorized service for the Product is available at selected Fluke
Calibration Service Center. For warranty or after-warranty service, contact the
nearest Technical Service Center for instructions. See How to Contact Fluke
Calibration.
To reship the Product, use the original shipping container. If the original carton is
not available, then a new container can be ordered from Fluke Calibration. See
How to Contact Fluke Calibration if necessary.