Remote Commands
Alphabetical List of 5790B Device-Dependent Commands 6
6-49
IDN?
Return detailed instrument ID and software version information.
Parameter
None
Example
Make: FLUKE
Model: 5790B
Serial #: 8675309
MAC address: 00:80:40:ff:00:19
Main Version: v1.08
Timestamp: 2015-05-12 11:41:03
git Branch: master
git ID: dd8f90596d6d8b6c70efc2a1111d72ddb0059552
Workspace: /evtfs/wg03/lancer/grponly/sw/Release/ogsrc
GUI Library: Qt 4.8.5
OS Build: Linux 20150420
A20 FPGA: v4 (2015-04-14)
Inguard: v=0.01 d=20140925 git=0abf8a13 fpga=5790b004
KKP: v1.00
Touch panel: EXC7200-0052v1001 v0210
INPUT
Selects the active input connector.
Parameter
INPUT1, INPUT2, AUX, or WBND
INPUT?
Returns the name of the active input connector.
Parameters
None
Response
(CRD) INPUT1, INPUT2, AUX, or WBND
IPADDR
Sequential command. Sets the IP address for LAN communication when NOT in
DHCP mode and with static IP addressing.
Parameter
IP address (quoted string consisting of 4 decimal values bound between 0-
255 separated by periods).
Example
IPADDR "129.196.136.119"
Sets the Ethernet IP static address to 129.196.136.119
To Next Page
Loading...
