Fluke 5790B - Page 150

5790B
Operators Manual
6-60
SH_CALDATE <i>
Sets the calibration date for the currently selected shunt
Parameter
1. (Integer) Cal date for selected shunt as YYYYMMDD.
Example
SH_CALDATE 20150223
SH_CALDATE?
Returns the calibration date for the currently selected shunt
Parameter
None
Example
SH_CALDATE?
20150223
SH_CLR
Disables/exits current shunt measurement window.
Parameter
None
SH_DCERR
Sets the DC ppm error for the currently selected shunt (if custom, set true
resistance).
Parameter
1. (Real) DC ppm error
Example
SH_DCERR 1.1
SH_DCERR?
Returns the DC ppm error for the selected shunt
Parameter
None
Example
SH_DCERR?
1.080000e+01