8508A
Users Manual
6. Fit the instrument to the rack as follows:
a. Attach a pair of rack-mount ears and a slide-rail to each side of the equipment
rack so they are ready to receive the instrument.
b. With assistance, and from the front of the equipment rack, insert the end of each
slide bar (on the Multimeter) into the appropriate slide-bar on the equipment
rack. Push the instrument home, and secure the front rack-mount ears to the front
of the equipment rack.
2
1
5
4
4b
4c
Figure C-1. Installing the 8508A Rack Mount Slide Kit
adj362f.eps
3
C-2
To Next Page
Loading...
