8508A Users Manual Supplement
OPERATOR SAFETY
SUMMARY
WARNING
LETHAL VOLTAGE
may be present on the terminals, observe all safety precautions.
To avoid electrical shock hazard, the operator should not electrically
contact the meter terminals or circuits connected to these terminals.
The terminal ratings permit lethal voltages of up to 1000 VAC RMS or dc
to be present on these terminals.
Whenever the nature of the operation permits, keep one hand away from
equipment to reduce the hazard of current flowing through vital organs of
the body.
Laboratory test equipment for measurement of controlled sources only.
Do not connect the measurement terminals to mains or mains circuits.
Use only current limited and controlled sources.
9/15 3
To Previous Page
Loading...
