Wireless Network Analyzer
Installing the Wireless LAN Card
11
If you are running Windows Service Pack 2 on Windows XP, and the firewall is
turned on, you will be prompted with the following screen after the WLAN card
has been inserted for the first time:
apo30s.bmp
Figure 5. Forcing Windows to Look for the WLAN Card Driver Locally
Select No, not at this time, and select Next.
On OptiView Series II analyzers, running Windows XP, you will also be prompted
with the following message telling you that the driver has not passed Windows
testing. Press Continue Anyway to complete the installation:
apo31s.bmp
Figure 6. Hardware Installation Message
To Next Page
Loading...
Need help?
General
