Fluke VT04 User Manual

Visual IR Thermometer
Menu Functions
21
Auto-Monitor (VT04)
The Auto-Monitor feature is similar to the alarm feature. The difference is that
instead of a flashing warning, the VT04 saves an image. When the temperature
of an object in the scene goes above or below the threshold value, the VT04
saves the image.
By default, the file name for these captured images includes an A, for example,
XXXA.is2.
Note
Measurements are the scene temperature (area shown inside the
markers).
To set the Auto-Monitor:
(-10 °C to +250 °C)
(15 min, 30 min,
1 hr, 2 hr, 4 hr, 8 hr)
To stop the Auto-Monitor:
Note
• The Auto Off feature is disabled in the Auto-Monitor mode.
• The Auto-Monitor feature is disabled when the Product is
connected to power.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Fluke VT04 Specifications

General

Type	Infrared environment thermometer
Purpose	-
Placement	Hand
Display type	Digital
Product color	Black, Yellow
Display form factor	Rectangular
Accuracy	2 °C
Clock function	Yes
Spectral response	6.5 - 14 µm
Temperature measurement range	-10 - 250 °C
Temperature measurement units	F, °C
Power source	Battery
Battery voltage	3.6 V
Number of batteries supported	1
Certification	EN 61326:2006, IEC/EN 61010-1:2010
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	8 h

Weight and Dimensions

Depth	55 mm
Width	75 mm
Height	210 mm
Weight	350 g