Fluke VT04 User Manual

Visual IR Thermometer
Measurements
23
Measurements
The temperature measurement of the center area is shown at the top of the
display. The emissivity setting also shows at the top of the display. When the
hot/cold temperature markers are turned on, move the Product until the hot or
cold spot coincides with the middle measurement area. Point the Product at an
object that is likely to be hotter or colder than its surroundings for best results.
The value of the hot/cold point shows at the top of the screen. This example
shows a measurement on the VT04 display.
hak13a.jpg
Smartview
®
Software
Smartview
®
software is supplied with the Product. This software contains
features to analyze images, organize data and information, and make
professional reports.
Smartview includes a function to export IR and visible images as .is2 files.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Fluke VT04 Specifications

General

Type	Infrared environment thermometer
Purpose	-
Placement	Hand
Display type	Digital
Product color	Black, Yellow
Display form factor	Rectangular
Accuracy	2 °C
Clock function	Yes
Spectral response	6.5 - 14 µm
Temperature measurement range	-10 - 250 °C
Temperature measurement units	F, °C
Power source	Battery
Battery voltage	3.6 V
Number of batteries supported	1
Certification	EN 61326:2006, IEC/EN 61010-1:2010
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	8 h

Weight and Dimensions

Depth	55 mm
Width	75 mm
Height	210 mm
Weight	350 g