EasyManuals Logo

Fluke VT04 User Manual

Fluke VT04
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
VT02, VT04
Users Manual
24
Maintenance
Maintenance is not necessary for this Product.
 Warning
To prevent possible electrical shock, fire, or personal injury, use
only specified replacement parts.
Caution
To prevent damage to the Product, do not leave the camera
exposed to a heat source or high-temperature environments,
such as an unattended vehicle in the sun.
How to Clean
Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/window. If
used and stored properly, the infrared lens on your Product should require only
occasional cleaning.
When necessary, to clean the lens:
1. Use a hand-squeeze air pump to gently blow off any dust or debris
from the lens surface.
2. If the lens surface requires additional cleaning, use a clean, fine-fiber
or micro-fiber cloth, dampened with a mild, soapy water solution.
Gently wipe surface of lens to remove smudges and debris.
3. Dry with an absorbent, clean fine-fiber or micro-fiber cloth.
Note
Minor smudges and dirt should not significantly affect the
performance of the Product. However, large scratches or the removal
of the protective coating on the infrared lens can affect both image
quality and the temperature measurement accuracy.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Other manuals for Fluke VT04

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke VT04 and is the answer not in the manual?

Fluke VT04 Specifications

General IconGeneral
TypeInfrared environment thermometer
Purpose-
PlacementHand
Display typeDigital
Product colorBlack, Yellow
Display form factorRectangular
Accuracy2 °C
Clock functionYes
Spectral response6.5 - 14 µm
Temperature measurement range-10 - 250 °C
Temperature measurement unitsF, °C
Power sourceBattery
Battery voltage3.6 V
Number of batteries supported1
CertificationEN 61326:2006, IEC/EN 61010-1:2010
Operating altitude0 - 2000 m
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)-5 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Battery life8 h
Weight and Dimensions IconWeight and Dimensions
Depth55 mm
Width75 mm
Height210 mm
Weight350 g

Related product manuals