Fluke VT04 User Manual

Visual IR Thermometer
Maintenance
25
Battery Care
 Warning
To prevent personal injury and for safe operation and
maintenance of the Product:
• Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with water
and get medical aid.
• Be sure that the battery polarity is correct to prevent battery
leakage.
• Do not short the battery terminals together.
• Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
• Do not disassemble or crush battery cells and battery packs.
• Do not put battery cells and battery packs near heat or fire.
Do not put in sunlight.
• Use only Fluke supplied power adapters to charge the VT04
battery.
  Caution
Do not incinerate the Product and/or battery. Go to Fluke’s
website for recycling information.
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com

Fluke VT04 Specifications

General

Type	Infrared environment thermometer
Purpose	-
Placement	Hand
Display type	Digital
Product color	Black, Yellow
Display form factor	Rectangular
Accuracy	2 °C
Clock function	Yes
Spectral response	6.5 - 14 µm
Temperature measurement range	-10 - 250 °C
Temperature measurement units	F, °C
Power source	Battery
Battery voltage	3.6 V
Number of batteries supported	1
Certification	EN 61326:2006, IEC/EN 61010-1:2010
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Battery life	8 h

Weight and Dimensions

Depth	55 mm
Width	75 mm
Height	210 mm
Weight	350 g