Fluke VT04 - VT02 Battery Replacement

To Next Page

To Previous Page

VT02, VT04

Users Manual

VT02

To replace the batteries:

1. Remove the battery cover from the handle.

2. Remove the discharged batteries.

Note

Do not charge the batteries included with the VT02.

3. Install new batteries with the correct polarity, see Figure 12.

hak06.eps

Figure 12. VT02 Battery Replacement

4. Slide battery cover into place on the handle.

Shop for Fluke products online at:

1.877.766.5412

Other manuals for Fluke VT04