7. System
7.1 Model Select
Use this function to select stored models, use the "UP" and "DOWN" keys to choose a model and press
and hold the "CANCEL" key to save and exit. The system can store up to 20 models.
7.2 Model Name
This function renames the currently selected model.
Setup:
1. Use the "UP" and "DOWN" keys to select a letter or number, then press the "OK" key to confirm.
2. To save press and hold the "CANCEL" key.
To return to default press and hold the "OK" key for 3 seconds,press and hold the "CANCLE" key to save.
7.3 Type Select
This function changes the type of the currently selected model, including airplane and helicopter with
different types of swashplates.
Setup:
1. To change the model type press the "UP" and "DOWN" keys to select the model type, then press and
hold the "CANCEL" key to save and exit.
7.4 Model Copy
This function copies the one model to another model slot.
Setup:
1. Use the "UP" and "DOWN" keys to select the model you want to copy.
2. Use the "OK" key to and use the "UP" and "DOWN" keys to select the slot to copy the model.
3. Press and hold the "OK" key to confirm, the system will display a prompt asking "Are you sure", use
the "UP' or "DOWN" key to select Yes and press "OK" again to confirm.
7.5 Model Reset
This function resets the current model to the default settings.
Setup:
1. Use the "UP' annd "DOWN" keys to select a model. Press the "OK' key to confirm,.
2. The system will display a prompt asking "Are you sure", use the "UP' or "DOWN" key to select Yes and
press "OK" key again to confirm.
7.6 Trainer Mode
Trainer mode is used to take control of a slave system when a switch is in the off position. This function
will only work when two systems are linked via the trainer lead.
Setup (This function must be assigned to a switch and will only be inactive when the switch is on):
1. Use the "UP" and "DOWN" keys turn the function on and off.
2. Use the "OK" key to and use the "UP" and "DOWN" keys to select a switch.
3. Press and hold the "CANCEL" key to save and exit.
To Next Page
Loading...
Need help?
General
