FlySky FS-TH9X - Multi LCD and Programming Controls; Display; Main Menu

10
Battery voltage
Modulation indicator
(PPM&PCM)
Elevator/Throttle trim
display
Throttle/Elevator trim
display
Rudder trim
display
Aileron trim
display
Timers
Model number
and name
Model type
6.1 DISPLAY
System setting
Function seting
Battery voltage: Battery voltage display (If after the voltage of the battery is lower than 8. 5V,Buzzer sends the suggestion sound through
5S once).
Model number and name: User' s parameter serial number showing(8groups can choose at most).
Rudder trim display: Rudder trim
Aileron trim display: Aileror trim
Elevator/Throttle trim display:Elevator/Throttle trim
Throttle/Elevator trim display:Throttle/Elevator trim
Timers:Competition count-down( 99 minutes and 59 seconds for a long time most) .
Model type:Ailplane Helicopter Glider select.
Modulation indicator: pulse position modulation &pulse code modulation select.
6.2 Main menu
System setting: Establish the initializing og the system.
Function setting: The function parameter of the mode type is established.
Press the UP or DOWM key to select the MENU screen.
Press the MENU key into next menu
Press the EXIT key to return last menu
.
The menu acts once and BUZZER sends a sound.
If the parameter transfers after the maximum in themenu,continuing pressing the button, BUZZER will not be pronounced.
NOTE:
6.Multi LCD and Programming controls
Under the state of the initial picture,press MENU key for long,access the main menu.
FS-TH9X