Program Program
Code Function Code Description Entry Code
30 Issue/Rev. 03 (8/97)
343 Display Resolution Enter: "0" Whole Unit Display 343
"1" Tenth Unit Display
"2" Hundredth Unit Display
"3" Tens Unit Display __
344 Proving Modes Enter: "0" Not Proving 344
"1" Weights and Measures Proving
"2" High-Speed Proving __
345 Proving Output Enter: "0" No Prover Output 345
"1" Product #1 Prover Output
"2" Product #2 Prover Output
"3" Product #3 Prover Output
"4" Product #4 Prover Output __
346 Proving Output Units Enter: "0" Raw Prover Output (Raw) 346
"1" Gross Prover (Grs)
"2" Gross Prover at Standard Temperature (Gst)
"3" Gross Prover at Standard Temperature
and Pressure Preset (Net)
"4" Mass Preset (Whole Units) __
347 Recipes Per Enter: "0" Single Recipe/Transaction 347
Transaction "1" Multiple Recipes/Transaction __
348 Blend Tolerance Enter: Two digits in tenths of a 348
(Percentage) percentage for the tolerance allowed
for all delivered blends.
(e.g., 5.0 = 5 %) __ . __
Note: The larger of the tolerances as calculated using the percentage entered in this code or the volume entered in code 349 will be used to
determine when a blend alarm should be triggered.
349 Blend Tolerance Enter: Three digits of Volume for 349
(Volume) Blend Tolerance in tenths of units.
(e.g., 10.0) __ __.__
Note: The larger of the tolerances as programmed in this code or calculated in code 348 will be used to determine when a blend alarm should be
triggered.
To Next Page
Loading...
