FoamPRO 2002 Series User Manual

1
INSTALLATION AND
OPERATION MANUAL
Form 829
6/16
All quality FoamPro products are ruggedly designed, accurately machined, carefully assembled, thoroughly inspected
and tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to follow
the instructions on care and operation. Proper use and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE.
Unit
Serial
Number
Systems 2001, 2002,
2002HP and 2024
FoamPro • 26 Southern Blvd. • Nesconset, NY 11767 USA • 800-533-9511 • FAX 816-892-3178

FoamPRO 2002 Series Specifications

General

Brand	FoamPRO
Model	2002 Series
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

General Safety Warnings

Important safety instructions for system installation and operation.

System Overview

How the System Works

Explanation of the electric motor-driven, flow-based proportioning system.

System Components

Control and Measurement Components

Digital display, flowmeter, and manifold for system operation.

Pump and Fluid Path Components

Installer Supplied Parts

Electrical Requirements

Details on power supply, wiring, and component specifications.

Installation Planning

Component Placement and Routing

Planning locations for system components and cable routing.

Plumbing Component Installation

Foam Pump/Motor Base Assembly

Guidelines for mounting the foam pump/motor base assembly horizontally.

Flowmeter(s)

Guidelines for proper flowmeter sizing and installation.

Electrical Equipment Installation

Electrical Connections

Instructions for making electrical connections between components.

Digital Display/Control Module

Details on mounting and connecting the Digital Display Control Module.

Electrical Power Supply

Making Sure Everything is Working Right

System Component Checks

Operational Checks

Simulated Flow and Priming Procedures

Simulated Flow Operation

Priming the Foam Pump

Calibration and Setup

Initial Setup Procedures

Flow and Pump Calibration

Calibrating flowmeters, simulated flow, and foam pump.

Operating Instructions

Normal System Operation

Step-by-step guide to normal system operation.

Display Functions and Messages

Maintenance

Routine Maintenance Schedule

Foam Pump Lubrication and Winterizing

Troubleshooting

Diagnostic Mode Operation

Troubleshooting Guide and Symptoms

Common symptoms, probable causes, and corrective actions.