Focus 3.2 - Page 150

External Control Commands
136
FireflySetWeb_Enable
The FireflySetWeb_Enable command gives the user the option to
turn on & off network communication to Webview.
Syntax
fireflysetweb_enable 0 (enable) or 1 (disable)
FireflyGetIpAddr
The FireflyGetIpAddr command retrieves current setting.
Syntax
fireflygetIpAddr
FireflyGetGateway
The FireflyGetGateway command retrieves current setting.
Syntax
fireflysetgateway
FireflyGetNetmask
The FireflyGetNetmask command retrieves current setting.
Syntax
fireflygetnetmask
FireflyGetNetworkType
The FireflyGetNetworkType command retrieves current setting.
Syntax
fireflygetnetworktype