Focus 3.2 - External Control Commands

External Control Commands
154
Time Code Request (?T)
Command:
Requests the file position in the current MPEG file in time code
format.
Format:
?T<CR>
Response:
<timecode><CR>
Explanation:
This command can be global specific. If received as a global
command, the Firefly will respond with the file position.
Examples:
Command Response Meaning
0@?T <CR> 0123329 <CR> 0Hr 12Min 33sec 29Fr
?T <CR> 0011402 <CR>
1081622 <CR>
0000612 <CR>
0103729 <CR>
0Hr 1Min 14Sec 2Fr
1Hr 8Min 16Sec 22Fr
0Hr 0Min 6Sec 12Fr
0Hr 10Min 37Sec 29Fr