Ford BRONCO 2022 - Switching Stability Control On and Off

Traction Control
Traction control enhances your vehicle’s
ability to maintain traction of the wheels
by detecting and controlling wheel spin.
See How Does Traction Control Work
(page 202).
E72903
Vehicle without stability control
skidding off its intended route.
A
Vehicle with stability control
maintaining control on a slippery
surface.
B
SWITCHING STABILITY
CONTROL ON AND OFF
The system turns on each time you switch
the ignition on.
The electronic stability control system is
disabled when the transmission selector
is in reverse (R).
You can switch the traction control
independently. See Switching Traction
Control On and Off (page 202).
Note: When you place your vehicle into
four-wheel drive low (4L), the stability
control disables. Stability control resumes
when you put your vehicle back into
two-wheel drive or four-wheel drive high
(4H).
205
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Stability Control