2. Remove the three fasteners on each
side in the rear cargo area using the
provided head driver and ratchet.
3. Remove the soft top.
Note: Safely store the soft top when it is
off your vehicle.
4. To install, reverse the removal
procedure. Torque the fasteners that
secure soft top to the vehicle to
15 ± 2 lb.ft (20 ± 3 Nm).
Note: Make sure the soft top is set flush on
the locating pins.
Note: Do not overtighten the fasteners. You
can strip the fasteners if they are
overtightened.
Installing the Soft Top Trim Piece
(If Equipped)
Make sure to install the soft top trim pieces
before installing the soft top.
Secure the three fasteners to the soft top
trim piece on each side of your vehicle
using the provided head driver and ratchet.
REMOVABLE FENDERS
REMOVABLE FENDER
PRECAUTIONS
WARNING: Do not drive your
vehicle on public roads with fenders
removed as you will lose the protection
they provide in a crash. Failure to follow
this instruction could result in personal
injury or death.
358
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Removable Vehicle Components
To Next Page
Loading...
