2. Lock the five quarter turn clips by
turning the clips clockwise.
STORING THE DOORS AND
THE ROOF PANELS - 4-DOOR
(IF EQUIPPED)
WARNING: Do not store removed
doors or roof panels in vehicle without
using the Ford onboard storage kit, and
verifying they have been secured per
instructions. Failure to follow this
instruction could result in personal injury
or death.
Note: Cargo can shift under severe vehicle
use, to reduce the risk of damage, avoid high
speed or extreme rock crawl off-road
situations when storing the doors in the
cargo area.
Note: Inspect the bags and harness
periodically to make sure they are not
damaged. Inspect the door retention
harness straps to make sure there are no
nicks, tears or cuts. Replace if necessary.
Note: Clean the roof panels and doors prior
to storing them in the bags as dirt may
damage the finish.
Storing the Front Roof Panels
1. Remove the front roof panels. See
Removing and Installing the Front
Roof Panel (page 350).
2. Open the bag and pull out the divider.
Place the first panel into the bag.
Replace the divider before placing the
second panel into the bag.
3. Zip the bag closed.
4. Gently slide the roof panel bag into the
cargo area.
Securing the Front Roof Panels
Vertically
1. Raise the bag to the vertical position.
360
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Removable Vehicle Components
To Next Page
Loading...
