Ford BRONCO 2022 - Setting the Adaptive Cruise Control Gap

Note: When adaptive cruise control is
active, the speedometer may vary slightly
from the set speed displayed in the
information display.
Manually Changing the Set Speed
Press and release the button to
increase the set speed in small
increments.
Press and hold the button to increase the
set speed in large increments. Release the
button when the displayed set speed is
equal to your desired speed.
Press and release the button to
decrease the set speed in small
increments.
Press and hold the button to decrease the
set speed in large increments. Release the
button when the displayed set speed is
equal to your desired speed.
Press the accelerator or brake pedal until
you reach the speed you prefer. Press the
button to select the current speed as the
set speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display when the system is
active.
SETTING THE ADAPTIVE
CRUISE CONTROL GAP
Note: A minimum vehicle speed of 15 mph
or 20 km/h must be met, before you can set
the gap.
Press the button to cycle
through the four gap settings.
E348855
The selected gap appears in the
instrument cluster display as shown by the
bars in the image.
Note: The gap setting is time dependent
and therefore, the distance adjusts with your
vehicle speed.
Note: It is your responsibility to select a gap
appropriate to the driving conditions.
Adaptive Cruise Control Gap Settings
Dynamic
Behavior
Gap DistanceGraphic
Display,
Bars Indic-
ated
Between
Vehicles
Sport.Closest.1
Normal.Close.2
Normal.Medium.3
Comfort.Far.4
Each time you switch the system on, it
selects the last chosen gap setting.
Following a Vehicle
When a vehicle ahead of you enters the
same lane or a slower vehicle is ahead in
the same lane, the vehicle speed adjusts
to maintain the gap setting.
238
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Adaptive Cruise Control (If Equipped)