Ford BRONCO 2022 - Switching Adaptive Cruise Control On and Off; Setting the Adaptive Cruise Control Speed

Optimal system performance requires a
clear view of the road by the
windshield-mounted camera.
Optimal performance may not occur if:
• The camera is blocked.
• There is poor visibility or lighting
conditions.
• There are bad weather conditions.
SWITCHING ADAPTIVE
CRUISE CONTROL ON AND OFF
The cruise controls are on the steering
wheel. See Cruise Control (page 232).
Switching Adaptive Cruise Control
On
E144529
Press the button to activate the
system. When the system
activates, the set speed is equal
to the current vehicle speed. If the speed
is too low, or other conditions are not
correct for adaptive cruise control
activation, the system enters standby
mode.
Note: The minimum set speed is 15 mph or
20 km/h.
The indicator, current gap setting and set
speed appear in the instrument cluster
display.
Switching Adaptive Cruise Control
Off
E144529
Press the button when the
system is in standby mode or
switch the ignition off.
Note: When you switch the system off, the
set speed clears.
Automatic Cancellation or
Deactivation
The system may cancel if:
• The tires lose traction.
• You apply the parking brake.
• Your vehicle speed falls significantly
below 15 mph or 20 km/h.
The system may turn off or prevent
activating when requested if:
• The vehicle has a blocked sensor.
• The brake temperature is too high.
• There is a failure in the system or a
related system.
SETTING THE ADAPTIVE
CRUISE CONTROL SPEED
Drive to the speed you prefer.
Press the button to set the
current speed.
Take your foot off the accelerator pedal.
The indicator, current gap setting and set
speed appear in the information display.
E355963
A vehicle image illuminates if there is a
vehicle detected in front of you.
237
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Adaptive Cruise Control (If Equipped)