Ford BRONCO 2022 - Removable Doors

7. To install the rear window, perform the
above steps in reverse order.
E347147
8. After installing the rear window, press
along the top of the window to secure
the hook and loop fastener strip.
Note: The buckles snap together and
window is flush when correctly installed. If
the parts have visible gaps or stick out they
are not correctly secured.
REMOVABLE DOORS
REMOVING AND INSTALLING THE
DOORS - VEHICLES WITHOUT:
TUBE DOORS
Removing the Doors
WARNING: Removal of doors for
off-road use only. Removing the doors
from the vehicle will affect protection
provided by the doors and may affect
safety system performance, including
safety canopy and front seat mounted
side airbags, during a crash or rollover.
WARNING: Vehicle needs to be
turned off before reconnecting doors to
verify all electrical connections have
been properly connected. Failure to
follow these instructions may affect
safety system performance, including
safety canopy and front seat mounted
side airbags, during a crash or rollover.
1. Fully open the windows on the doors
you are removing.
2. Switch your vehicle off.
3. Fold the mirrors toward the front of
your vehicle before removing the front
doors.
4. Fully open the door you are removing.
E347602
5. Locate the fender protector in the tool
pouch and install it over the fender
edge near the top door hinge.
E328722
6. To release the door harness connector,
open the connector door and pull the
connector straight out.
342
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Removable Vehicle Components