Forma Scientific 3158 - Parts List; Component Parts List

Forma Scientific, Inc.
__________________________________________________________________________
2-1
SECTION 2 - UNPACKING LIST
2.1 UNPACKING LIST
Remove the packing box from the incubator. If the unit is to be moved by fork lift,
leave the incubator on the skid until it has been moved to its designated location. A
plastic bag containing the following accessories is packed inside the incubator:
Qty. Stock # Description Purpose
1 190028 Decontamination Kit Maintenance
1 180001 Polypropylene Funnel Fill & Drain
3' 246011 Vinyl Tubing 3/8" ID Fill & Drain
6' 246010 Vinyl Tubing 3/16" ID CO
2
Connection
1 285057 Extender Card Maintenance & Calibration
Also packed with each incubator:
Qty. Stock # Description
24
23052
Stainless Steel Wing Nuts (#10-32)
20
55000
Stainless Steel Screws (Truss Head #10-32" x 5/8")
1
121034
Cam Latch (Nylon)
1
127019
Stainless Steel Spacer (1/4" Diameter x 9/16")
1
550017
Stainless Steel Screw (Truss Head #8-32" x 1")
1
23051
Stainless Steel Wing Nut (#8-32)
5
224140
Stainless Steel Shelves
1
600034
Snapper Hose Clamp (.375")
4
3113234
Shelf Brackets
1
3113224
Stainless Duct Channel, Top
1
3113222
Stainless Duct Sheet, Left
1
3113223
Stainless Duct Sheet, Right
1
130038
#6 Neoprene Stopper
1
190388
Telephone Line Cord, 12'
1
190392
Modular RJ-11 Jack
1
7053158
Instruction Manual