EasyManuals Logo

Fort 280 Series User Manual

Fort 280 Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
testedbytheManufacturerwereassembledonthe
machine;
- incase,furthertorepairscarriedoutbytheuser
withouttheManufacturer’spermissionorincase,
duetotheassemblyofnon-genuinespareparts,
themachineundergoeschangesandthedamage
isattributabletosuchchanges:
- incasetheinstructionslistedinthismanualare
notcompliedwith;
- ifsomeexceptionaleventsshouldhappen.
Moreover,thewarrantydoesnotincludethedamages
resultingformnegligence,carelessness,baduseand
misuseofthemachine.
WARNING
The tampering of the safety devices on the machine
shall automatically void the warranty and the Manu-
facturer’s responsibility.
1.3 IDENTIFICATION OF THE MACHINE
ENGINE.Toidentifytheengineitisnecessaryto
consulttheinstructionsmanualofthespecicengine,
bycomparingthedataonthenameplateoftheengine
Manufacturer.
MACHINE.Eachmachinehasanidenticationplate
(1Fig.1),listing:
- NameandaddressoftheManufacturer;
- «EC»marking;
- A)Model;
- B)Yearofmanufacture;
- C)MassinKg.
Thedatareportedontheidenticationplateidentify-
ingthemachineshallbereportedonthebackofthis
manualandtheyshallalwaysbementionedincase
sparepartsand/orservicearerequired.
The machine in the standard version is equipped
with:
- instructionsmanualforoperatingandmaintaining
themachine;
- instructionsmanualforoperatingandmaintaining
theengine;
- «EC»declarationofconformity;
Kitincluding:
- 10-13allenwrench;
- 13-17allenwrench;
- Screwdriver;
- Spannerforsparkingplug.
ThemachinealsohasPVC capforPTO protec-
tion.
Bothabovementionedmanualsaretobeconsidered
anintegralpartofthemachineand theymustbe
carefullyreadbeforecarryingoutanyinterventionor
beforeusingit(evenbeforeunpackingit).
1.4 DESCRIPTION OF THE MACHINE AND
AUTHORIZED USE
Themowermodel«280»isamachine«EC»marked
incompliancewiththeregulationsoftheEuropean
UnionlistedintheDirective2006/42/EC,2004/108/
EC,asdescribedinthedeclarationofconformityat-
tachedtoeachmachine.
1.4.1 USE OF THE MACHINE
Itisaself-propelledagriculturalmachine,whichcan
beequippedwithvariousaccessories.
Equipment interchangeable fronts:
-Groupcutterbar;
-FlailMower-FlailMower-mower;
-Frontbrushroll;
-Frontshovel;
-Two-stagesnowblowers.
Interchangeable equipment rear:
-Groupcutteradjustable;
-Adjustablefurrowingrearcutter;
-Adjustablefurrowing;
-Plow;
-Smalltrailerwithbrakes;
-Sprayingpumpanged;
-Wagonbarrel.
Accessories Multi-Purpose:
-Wheelsareavailableonrequest:
3.50x6
4.00x8
4.00x10
16x6.50x8
-Wheelswithsteelcage;
-Wheels«Margherita»(onlyfor4.00X10);
-Enlargementswheels;
-Snowchainsforwheels;
-Wheelstwins.
DANGER
The operator shall be skilled and able to read and
understand what is written in this manual.
The operator, moreover, shall use the machine
by keeping in mind the regulations in force for the
accident prevention, the conditions of use and the
specications of the machine itself.
ENGLISH

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fort 280 Series and is the answer not in the manual?

Fort 280 Series Specifications

General IconGeneral
BrandFort
Model280 Series
CategoryTiller
LanguageEnglish

Related product manuals