Configuration overview
Type Description
Reset Factory defaults the phone.
Setting Accesses the Setting section.
Feature Accesses the Feature section.
Tool Accesses the Tool section.
App Accesses the App section.
Prog-Key Accesses Programmable Key settings.
Bluetooth Accesses Bluetooth settings.
Menu Accesses the Menu (enabled by default on the 4th soft key).
Blank Leaves the soft key blank.
Accessory
Setting > Accessory allows you to configure the following settings:
Item Description
Handsfree Priority Configures the following options to answer a call:
l
Speaker: When you receive a call and press the Answer soft key while the
handset is onhook, the phone uses the speaker.
l
Headset: When you receive a call and press the Answer soft key, the phone
uses the headset.
EHS Headset Enables EHS (Electronic Hookswitch), for use with compatible headsets.
USB Headset Enables headset support through the USB port.
Bluetooth Enables and scans for Bluetooth headsets.
Connecting a Bluetooth headset
To use a Bluetooth headset with a FON-380 phone, you must connect a CSR Bluetooth USB
dongle.
The FON-480 and FON-580 phones can support a Bluetooth headset without the addition of a
dongle.
For more details, see Appendix A:Supported Bluetooth headsets and dongles on page 44.
1. Go to Setting > Accessory > Bluetooth.
2. Ensure Bluetooth is set to Enabled.
3. Press the Scan soft key.
4. Select the discovered Bluetooth device and press the Pair soft key.
FortiFone FON-x80 Series 3.0.12 User Guide 22
Fortinet Inc.
To Next Page
Loading...
