Fortinet FON-80 Series - Redialing; Hold; Mute; Attended Transfer

Using your phone
l
Call waiting on page 36
l
DND on page 36
l
Text message on page 36
l
Voicemail on page 37
Redialing
Allows you to redial the last number dialed:
l
Press . The phone activates the speakerphone and places the call.
l
You can also lift the handset or press followed by pressing .
Hold
To place calls on hold, press the Hold soft key. While a call is on hold, you can answer or place other calls. The held party
will hear music, if configured to do so on the FortiVoice phone system.
To toggle between two calls, use the navigation keys and press the Answer or Resume soft key.
Mute
Mute turns the phone’s microphone on or off:
l
Press to disable the microphone. The mute button will turn red.
l
Press again to enable the microphone. The mute button will no longer be red.
Attended transfer
Calls can be announced to the party receiving the transfer before completing the transfer.
To perform an attended transfer
1. While on a call, press the Transfer soft key.
2. Dial the extension or phone number and press the Dial soft key.
3. Announce the call.
4. Press the Transfer soft key.
Blind transfer
Calls can be transferred without talking to the party receiving the transfer.
To perform a blind transfer
1. While on a call, press the Transfer soft key.
2. Dial the extension or phone number.
3. Press the Transfer soft key.
FortiFone FON-x80 Series 3.0.12 User Guide 35
Fortinet Inc.