Fortinet FON-80 Series - Page 24

Configuration overview
Item Description
informing you if there is a call parked.
Type (when using FortiVoice
Cloud)
When your extension is using FortiVoice Cloud, select the action to take when the
key is pressed:
l
None – Nothing will happen when the key is pressed.
l
Intercom – Activates an intercom call.
l
Park – Places the call into the first available call park slot.
l
Speed Dial – Allows you to quickly place a call to an extension or a phone
number.
l
Twinning – Enables or disables the function which allows an external phone
to ring along with your office phone, so you can answer the call at either
phone.
l
Shared Line Appearance – Allows you to perform the following actions for a
shared line included in a group:
l
Monitor calls.
l
Answer a call.
l
Pick up a call that is on hold on another phone.
To configure the following programmable keys, access the FortiVoice Cloud user
portal (see the FortiVoice Cloud User Portal Guide):
l
Extension appearance - Allows you to monitor the status of the selected
extension (idle, ringing, in use, DND, or on hold) and transfer a call to the
selected extension. The transfer is blind or attended depending on the setting
configured on FortiVoice Cloud.
l
Line appearance - Allows you to monitor the status of a line (available, busy,
or on hold). If the light is flashing, you can press the programmable key to
retrieve the call.
l
Park appearance - Allows you to monitor the selected call park slots,
informing you if there is a call parked.
Label Enter a label to display on selected programmable key.
Line Select the line to perform the selected action on.
Parameter Used to configure the value for the following types when using the FortiVoice
phone system:
l
Intercom
l
Record
l
Speed Dial
l
DTMF
Used to configure the value for the following types when using FortiVoice Cloud:
l
Intercom
l
Speed dial
FortiFone FON-x80 Series 3.0.12 User Guide 24
Fortinet Inc.