Fortinet FortiMail 3.0 MR4 - Auth Pop3 Server

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
136 06-30004-0420-20080814
auth pop3 server set
auth pop3 server
Use this command to create or modify the server properties of an POP3 authentication profile
Syntax
set auth pop3 <name_str> server {<host_str> | <server_ipv4>} port
<port_int> [option {ssl secure tls domain}]
History
Related topics
• set auth pop3 rename-to
Keywords and Variables Description Default
<name_str> This is the name of the POP3 authentication profile.
{<host_str> |
<server_ipv4>}
Enter either the POP3 server host name or IP address.
port <port_int> Enter the POP3 server port number. 110
[option {ssl secure
tls domain}]
These optional settings further define the connection to the POP3 server.
• {ssl} enables Secure Sockets Layer (SSL) on the POP3 server to
secure message transmission.
• {secure} enables Secure Authentication on the POP3 server to
secure email users passwords.
• {tls} enables Transport Layer Security (TLS) on the POP3 server to
ensure privacy between communicating applications and their users on
the Internet.
• {domain} select if the POP3 server requires the domain for
authentication.
FortiMail v3.0 New.